Skip to main content


alt Docker Pulls Count

Para fazer o pull do último pré-builddocker image:

docker pull verdaccio/verdaccio

Docker pull

Versões com Tags

Desde a versão v2.x, você pode fazer o pull das imagens pela tag, por exemplo:

Para uma versão principal:

docker pull verdaccio/verdaccio:4

Para uma versão secundária:

docker pull verdaccio/verdaccio:4.0

Para uma versão específica (patch):

docker pull verdaccio/verdaccio:4.0.0

Se você está interessado em uma lista de tags, por favor acesse o Docker Hub.

Executando o Verdaccio usando Docker

Para executar o container do docker:

docker run -it --rm --name verdaccio -p 4873:4873 verdaccio/verdaccio

O último argumento define qual imagem usar. A linha acima irá puxar a imagem pré-construída mais recente do dockerhub, caso você não tenha feito ainda.

Se você tiver uma imagem construída localmente use verdaccio como o último argumento.

You can use -v to bind mount conf, storage and plugins to the hosts filesystem:

V_PATH=/path/for/verdaccio; docker run -it --rm --name verdaccio \
-p 4873:4873 \
-v $V_PATH/conf:/verdaccio/conf \
-v $V_PATH/storage:/verdaccio/storage \
-v $V_PATH/plugins:/verdaccio/plugins \

if you are running in a server, you might want to add -d to run it in the background Note: Verdaccio runs as a non-root user (uid=10001) inside the container, if you use bind mount to override default, you need to make sure the mount directory is assigned to the right user. In above example, you need to run sudo chown -R 10001:65533 /opt/verdaccio otherwise you will get permission errors at runtime. Use docker volume is recommended over using bind mount.

O Verdaccio 4 fornece um novo conjunto de variáveis de ambiente para modificar permissões, porta ou protocolo http. Abaixo a lista completa:

VERDACCIO_APPDIR/opt/verdaccio-buildo diretório de trabalho do docker
VERDACCIO_USER_NAMEverdaccioo usuário do sistema
VERDACCIO_USER_UID10001o Id do usuário sendo usado para aplicar permissões de pasta
VERDACCIO_PORT4873a porta do verdaccio
VERDACCIO_PROTOCOLhttpo protocolo http padrão


If SELinux is enforced in your system, the directories to be bind-mounted in the container need to be relabeled. Otherwise verdaccio will be forbidden from reading those files.

 fatal--- cannot open config file /verdaccio/conf/config.yaml: Error: CONFIG: it does not look like a valid config file

If verdaccio can't read files on a bind-mounted directory and you are unsure, please check /var/log/audit/audit.log to confirm that it's a SELinux issue. In this example, the error above produced the following AVC denial.

type=AVC msg=audit(1606833420.789:9331): avc:  denied  { read } for  pid=1251782 comm="node" name="config.yaml" dev="dm-2" ino=8178250 scontext=system_u:system_r:container_t:s0:c32,c258 tcontext=unconfined_u:object_r:user_home_t:s0 tclass=file permissive=0

chcon can change the labels of shared files and directories. To make a directory accessible to containers, change the directory type to container_file_t.

$ chcon -Rt container_file_t ./conf

If you want to make the directory accessible only to a specific container, use chcat to specify a matching SELinux category.

An alternative solution is to use z and Z flags. To add the z flag to the mountpoint ./conf:/verdaccio/conf simply change it to ./conf:/verdaccio/conf:z. The z flag relabels the directory and makes it accessible by every container while the Z flags relables the directory and makes it accessible only to that specific container. However using these flags is dangerous. A small configuration mistake, like mounting /home/user or /var can mess up the labels on those directories and make the system unbootable.


Plugins can be installed in a separate directory and mounted using Docker or Kubernetes, however make sure you build plugins with native dependencies using the same base image as the Verdaccio Dockerfile.

FROM verdaccio/verdaccio USER root ENV NODE_ENV=production RUN npm i && npm install verdaccio-s3-storage USER verdaccio

Configuração de Docker e porta customizada

Any host:port configured in conf/config.yaml under listen is currently ignored when using docker.

If you want to reach Verdaccio docker instance under different port, lets say 5000 in your docker run command add the environment variable VERDACCIO_PORT=5000 and then expose the port -p 5000:5000.

V_PATH=/path/for/verdaccio; docker run -it --rm --name verdaccio \
-e "VERDACCIO_PORT=8080" -p 8080:8080 \

Of course the numbers you give to the -p parameter need to match.

Usando HTTPS com Docker

You can configure the protocol verdaccio is going to listen on, similarly to the port configuration. You have to overwrite the default value("http") of the PROTOCOL environment variable to "https", after you specified the certificates in the config.yaml.

docker run -it --rm --name verdaccio \
--env "VERDACCIO_PROTOCOL=https" -p 4873:4873

Usando docker-compose

  1. Obtenha a última versão do docker-compose.
  2. Construa e execute o contêiner:
$ docker-compose up --build

You can set the port to use (for both container and host) by prefixing the above command with VERDACCIO_PORT=5000.

version: '3.1'

image: verdaccio/verdaccio
container_name: "verdaccio"
- node-network
- "4873:4873"
- "./storage:/verdaccio/storage"
- "./config:/verdaccio/conf"
- "./plugins:/verdaccio/plugins"
driver: bridge

Docker will generate a named volume in which to store persistent application data. You can use docker inspect or docker volume inspect to reveal the physical location of the volume and edit the configuration, such as:

$ docker volume inspect verdaccio_verdaccio
"Name": "verdaccio_verdaccio",
"Driver": "local",
"Mountpoint": "/var/lib/docker/volumes/verdaccio_verdaccio/_data",
"Labels": null,
"Scope": "local"

Construa a sua própria imagem Docker

docker build -t verdaccio .

There is also an npm script for building the docker image, so you can also do:

yarn run build:docker

Note: The first build takes some minutes to build because it needs to run npm install, and it will take that long again whenever you change any file that is not listed in .dockerignore.

Please note that for any of the above docker commands you need to have docker installed on your machine and the docker executable should be available on your $PATH.

Exemplos de Docker

There is a separate repository that hosts multiple configurations to compose Docker images with verdaccio, for instance, as reverse proxy:

Construções de Docker Personalizadas

If you have made an image based on Verdaccio, feel free to add it to this list.